Don’t miss our upcoming auction featuring biofuel technology equipment, former assets of Kior / Inaeris Technologies. The auction will take place May 9, 2019.
Inaeris Technologies has created a proprietary technology platform that transforms non-food, cellulosic biomass into drop-in transportation fuel blendstocks. Their technology is flexible and can be commercialized either as a stand-alone facility or as an addition to an existing facility, such as one that already processes biomass (a pulp/paper mill) or produces fuels (a petroleum refinery).
Auction Links:
Auction Information:
- Location: Pasadena, TX
- Sale Held In Conjunction With: Tiger Capital Group, LLC
- Bid Online: Thursday, May 9, 2019
- Inspection: Wednesday, May 8 from 10am to 4pm (CT)
- Sale Conducted In: $USD / 18% Buyers Premium
- Contact: Ted Davis: 216.536.1300 | ted@fedequip.com
Asset Highlights:
SOLIDS LAB INCLUDING:
- Buchi R124 rotavapor
- Micromeritics ASAP2420 surface area and porosity analyzer
- Micromeritics surface area and porosity analyzer
- Axios panalytical x-ray unit
- Spex SamplePrep 8000m mixer/mill
- Carver 8×8 press
- Malvern Hydro2000G particle size analyzer
- IKA mixer
- Malvern Scirocco 2000 particle size analyzer
- Sindie 7039XR sulfur analyzer
- Sindie OTG sulfur analyzer
PROCESS RESEARCH UNIT (“PRU”):
- (4) IKA mixers
- Fisher isotemp vacuum oven
- Thermo thermolyne furnace
- MTI vacuum oven
- Fisher isotemp furnace
- Thermo Legend X1 centrifuges
- Cold flow simulation unit with Coperion gravimetric and volumetric feeders
- Catalyst attrition units
- Hiden QIC-20 with cat lab
- 2 Liter Parr reactor, 316 Stainless Steel, 1900 psi, with 4848 controller
PLASTIC CATALYST ATTRITION UNIT:
- Agilent 7890A GC
- ATZ steamer unit with (4) pods, electrical heaters
- (3) PRU units each with ATS reactor, powder feeder, condensers, gas analyzer, Agilent 7890A GC and Horiba VA-3000 gas analyzer
- Multiple hand-held inspection units and instruments
MAIN PLANT AREA:
- Bartlet and Snow alstrom calciner, 6″ diameter x60′ hot zone, bellows, screw feeder, 14″ cooling zone, (4) zone control panel, hammer mill
- 30 HP Quincy QSB30 air compressor with dryer and air tank
- 6″ Sturtevant micronizer, Stainless Steel with Schenck feeder on stand
- 24″ Sweco screen, single deck
- Chicago Boiler horizontal media mill, model CU4, jacketed, 15 hp
- 5 Gal Autoclave Engineers autoclave
- Paul O Abbé ribbon blender, 1 cu ft, Stainless Steel, model hm1
- NETZSCH™ LABSTAR1 media mill, new 2012
- Spray drying system
- Vulcan furnace
- Hydrogen booster compressor pump
HT PILOT PLANT BUILDING:
- Agilent 6890N GC
- Autoclave Engineers autoclave, 5000 psi
- Zeton 5 bed hydratreater unit
- Ventec 2 bed hydratreater, (ventec no longer in busness)
- (2) Zeton FCC (fluid cracking catalyst) units, modified for solids process not liquid process • Agilent 7890A GC
- 18″ Sweco screen
- Thermo centrifuge
- (3) Agilent 7890A GC units
DEMONSTRATION PLANT:
- Magnetic separator
- Screener
- Bliss wet mill
- Direct fired Roto- Louver dryer with cyclone and dust collector
- Bliss dry mill
- Large storage silo
- Zeton 1/50 size FCC unit
- PCC RTO thermal oxidizer, gas fired
- Fulton boiler, electric heated, 308 btu/hour
- Ventec 7 bed hydratreater with recycle compressor, hydrogen compressor, cross exchange and exchanger, w/hydro cracking capability
FRACTIONATOR BUILDING:
- 6″ fractionator column, approx. 50′ high with main column, (2) side strippers, associated heat exchangers, pumps, receivers and feed tanks
- Compressor general hydro carbon unit for demo unit
- Hammer mills
- (2) 40″ Sweco
- (2) Retsch mill with K-TRON feeder
View All Federal Equipment Company Auctions & Liquidations >>
